Temperature servo energy saving equipment fan speed automatic regulation
Adhere to efficiency and energy conservation, process energy conservation, energy conservation of the whole plant, and "saving" as much as possible to help enterprises to save energy and increase efficiency!
1. Hopper dry, dehumidifier temperature servo system core technology
1) Temperature servo control technology: adopt temperature closed-loop control
2) Servo control technology of fan speed: manual and automatic regulation technology of fan speed
3) Overall safety prevention and control technology: The whole machine adopts triple safety prevention and control technology to ensure the safety of the machine, and all electronic components adopt automobile level accessories
2. Servo system Advantage
1) The process is divided into cold material heating section and heat preservation heating section, and the energy-saving effect is achieved by servo regulation according to the heat exchange required for heat preservation
2) In general, power saving rate: 40% - 70%
3) Power on detection: Thermocouple detection, fan detection, heating rod detection, heating zone thermocouple detection, process parameter detection
4) Detection during operation: temperature rise curve, fan detection, heating rod missing item detection
5) Heating zone temperature protection
6) The temperature adopts servo closed-loop control, and the accuracy is controlled within the thermocouple detection accuracy range, generally plus or minus 1.5 °
3. Specification
| Servo model | Driver power | Output voltage | Output current | Dryer model | Heating power | Fan power |
| SES100-4T08 | 8kw | 0-380V | 0-21 | 100kg | 7kw | 250w |
| SES100-4T12 | 12kw | 0-380V | 0-31 | 150kg | 9kw | 250w |
| SES100-4T12 | 12kw | 0-380V | 0-31 | 200kg | 12kw | 400w |
| SES100-4T15 | 15kw | 0-380V | 0-39 | 250kg | 14.5kw | 400w |
| SES100-4T15 | 15kw | 0-380V | 0-39 | 300kg | 14.5kw | 400w |
| SES100-4T18 | 18kw | 0-380V | 0-47 | 400kg | 18kw | 500w |
| SES100-4T25 | 25kw | 0-380V | 0-65 | 600kg | 24kw | 800w |
| SES100-4T30 | 30kw | 0-380V | 0-79 | 800kg | 30kw | 1100w |
| | | | | | | |
4. Parameter setting, process, operation curve, alarm and other states are clearly visible
5. Installation
The installation of the equipment is very simple, which can be installed by general electricians. In consideration of the universality, the heating and fan are not distinguished from single-phase and three-phase, and the wiring can be done according to the instructions on the equipment
1) Power off of equipment
2) Remove all wires of the original control box: power wire (three-phase four wire), thermocouple wire, fan wire, heating rod wire
3) Remove the original control box
4) Install the servo driver backplane
5) Installing temperature servo driver
6) Wire according to the indication: power wire (three-phase four wire), thermocouple wire, fan wire, heating rod wire
7) Install the heating zone thermocouple and connect it to the temperature servo driver
8) Cover the protection cover of the upper row
9) Install the driver upper and lower cover plates
10) Power on, driver switch on
Product Tags:
|
|
Fan Speed Automatic Regulation Temperature Servo Energy Saving Equipment Images
|
